Toyota CH-R Owners Manual: Other functions

Toyota CH-R Owners Manual / Interior features / Using the air conditioning system and defogger / Air conditioning system / Other functions

■ Switching between outside air and recirculated air modes Press .

The mode switches between outside air mode (indicator off) and recirculated air mode (indicator on) each time is pressed.

■ Defogging the windshield Defoggers are used to defog the windshield and front side windows.

Press .

The dehumidification function operates and fan speed increases.

Set the outside/recirculated air mode button to the outside air mode if the recirculated air mode is used. (It may switch automatically.) To defog the windshield and the front side windows early, turn the air flow and temperature up.

To return to the previous mode, press again when the windshield is defogged.

■ Defogging the rear window and outside rear view mirrors Defoggers are used to defog the rear window, and to remove raindrops, dew and frost from the outside rear view mirrors.

Press .

The defoggers will automatically turn off after a period of time.

■ Windshield wiper de-icer (if equipped) This feature is used to prevent ice from building up on the windshield and wiper blades.

Press .

The windshield wiper de-icer will automatically turn off after a period of time.

■ Climate control customization Climate control setting can be changed.

Press .

The air conditioning is controlled with low fuel consumption prioritized such as reducing fan speed, etc.

Using automatic mode

1. Press . The dehumidification function begins to operate. Air outlets and fan speed are automatically adjusted according to the temperature setting. 2. Adjust the temperature setting. 3. To st ...

Air outlets

■ Location of air outlets The air outlets and air volume change according to the selected airflow mode. ■ Adjusting the position of and opening and closing the air outlets Direct air fl ...

Other materials:

Toyota CH-R Service Manual > Front Evaporator Temperature Sensor(for Denso Made): Inspection
INSPECTION PROCEDURE 1. INSPECT NO. 1 COOLER THERMISTOR (a) Check the resistance. (1) Measure the resistance according to the value(s) in the table below. *a Component without harness connected (No. 1 Cooler Thermistor) *b Sensing Portion ...

Toyota CH-R Service Manual > Air Conditioning System(for Automatic Air Conditioning System With Side-mounted Air Conditioner Pressure Sensor): Refrigerant Shortage (B14B8)
DESCRIPTION This DTC is stored if the amount of refrigerant in the air conditioning system is insufficient. The air conditioning amplifier assembly receives the ambient temperature signal, refrigerant pressure signal, etc. from various sensors. Based on these signals, the air conditioning amp ...