Air outlets are automatically selected and fan speed is automatically adjusted according to the set temperature setting.
Toyota CH-R Service Manual > Blower Unit(for Denso Made): Reassembly
REASSEMBLY
PROCEDURE
1. INSTALL NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY
(a) Connect the 2 links of the blower assembly to the 2 plates of the
No. 1 blower damper servo sub-assembly as shown in the illustration.
...
Toyota CH-R Service Manual > Charging System: Dtc Check / Clear
DTC CHECK / CLEAR
CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
(e) Check for DTCs, and then write them down.
Powertrain > Engine and ECT > Tro ...