Toyota CH-R Service Manual: Main Body ECU Vehicle Information Reading/Writing Process Malfunction (B15F6)

Toyota CH-R Service Manual / Navigation / Multi Info Display / Navigation System / Main Body ECU Vehicle Information Reading/Writing Process Malfunction (B15F6)

DESCRIPTION

This DTC is stored when items controlled by the main body ECU (multiplex network body ECU) cannot be customized via the navigation system vehicle customization screen.

HINT:

The main body ECU (multiplex network body ECU) controls the items for the following systems that are customizable via the navigation system vehicle customization screen:

  • Power door lock control system
  • Wireless door lock control system
  • Lighting system (for Interior)
  • Lighting system (for Exterior)

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

B15F6

Main Body ECU Vehicle Information Reading/Writing Process Malfunction

Main body ECU (multiplex network body ECU) vehicle setting processing malfunction
  • CAN communication system
  • Power door lock control system
  • Wireless door lock control system
  • Lighting system (for Interior)
  • Lighting system (for Exterior)
  • Main body ECU (multiplex network body ECU)
  • Radio and display receiver assembly

CAUTION / NOTICE / HINT

NOTICE:

  • When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:
    • A communication malfunction DTC may be stored.
    • The radio and display receiver assembly may not operate normally.

PROCEDURE

1.

CHECK CAN COMMUNICATION SYSTEM

(a) Use the Techstream to check if the CAN communication system is functioning normally.

Click here

OK:

CAN communication DTCs are not output.

NG

GO TO CAN COMMUNICATION SYSTEM

OK

2.

CHECK POWER DOOR LOCK CONTROL SYSTEM

(a) Check if the power door lock control system is malfunctioning.

Click here

HINT:

Customization may not be possible depending on the malfunction in the power door lock control system.

OK:

No malfunctions are present in the power door lock control system.

NG

GO TO POWER DOOR LOCK CONTROL SYSTEM

OK

3.

CHECK WIRELESS DOOR LOCK CONTROL SYSTEM

(a) Check if the wireless door lock control system is malfunctioning.

Click here

HINT:

Customization may not be possible depending on the malfunction in the wireless door lock control system.

OK:

No malfunctions are present in the wireless door lock control system.

NG

GO TO WIRELESS DOOR LOCK CONTROL SYSTEM

OK

4.

CHECK LIGHTING SYSTEM (for Interior)

(a) Check if the lighting system (for Interior) is malfunctioning.

Click here

HINT:

Customization may not be possible depending on the malfunction in the lighting system (for Interior).

OK:

No malfunctions are present in the lighting system (for Interior).

NG

GO TO LIGHTING SYSTEM (for Interior)

OK

5.

CHECK LIGHTING SYSTEM (for Exterior)

(a) Check if the lighting system (for Exterior) is malfunctioning.

Click here

HINT:

Customization may not be possible depending on the malfunction in the lighting system (for Exterior).

OK:

No malfunctions are present in the lighting system (for Exterior).

NG

GO TO LIGHTING SYSTEM (for Exterior)

OK

6.

CHECK CUSTOMIZE ITEMS

(a) Make a note of the customizable items for each main body ECU (multiplex network body ECU) related system.

HINT:

The items shown as customizable via the navigation system vehicle customization screen can also be changed using the Techstream. In the following steps, the Techstream will be used.

(1) To match-up the items on the navigation system vehicle customization screen with the items on the Techstream, check the customize parameters list for the power door lock control system related items that can be customized via the navigation system vehicle customization screen.

Click here

(2) To match-up the items on the navigation system vehicle customization screen with the items on the Techstream, check the customize parameters list for the wireless door lock control system related items that can be customized via the navigation system vehicle customization screen.

Click here

(3) To match-up the items on the navigation system vehicle customization screen with the items on the Techstream, check the customize parameters list for the lighting system (for Interior) related items that can be customized via the navigation system vehicle customization screen.

Click here

(4) To match-up the items on the navigation system vehicle customization screen with the items on the Techstream, check the customize parameters list for the lighting system (for Exterior) related items that can be customized via the navigation system vehicle customization screen.

Click here

(b) Using the Techstream, check that it is possible to change the settings of the customize parameters that are available for customization via the navigation system vehicle customization screen.

OK:

The items available for customization via the navigation system vehicle customization screen can be customized successfully using the Techstream.

OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

NG

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

    Diagnostic Trouble Code Chart
    DIAGNOSTIC TROUBLE CODE CHART Navigation System DTC No. Detection Item Link B1324 Lost Communication with Meter ...

    Certification ECU Vehicle Information Reading/Writing Process Malfunction (B15F7)
    DESCRIPTION This DTC is stored when items controlled by the certification ECU (smart key ECU assembly) cannot be customized via the navigation system vehicle customization screen. HINT: The cer ...

    Other materials:

    Toyota CH-R Service Manual > Charging System: On-vehicle Inspection
    ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT NOTICE: If the battery is weak or if the engine is difficult to start, recharge the battery and perform inspections again before returning the vehicle to the customer. PROCEDURE 1. CHECK BATTERY CONDITION (a) Check the battery for damage or defor ...

    Toyota CH-R Service Manual > Vehicle Stability Control System: Open in Stop Light Switch Circuit (C1425)
    DESCRIPTION The skid control ECU (brake actuator assembly) receives stop light switch signals and uses them to determine whether or not the brakes are applied. The skid control ECU (brake actuator assembly) has a detection circuit that it uses to detect an open in the stop light input line. I ...

    Toyota CH-R Owners Manual

    Toyota CH-R Service Manual

    © 2017-2024 Copyright www.tochr.net
    0.0135