Toyota CH-R Owners Manual: Front seats

Adjustment procedure

  1. Seat position adjustment lever
  2. Seatback angle adjustment lever
  3. Vertical height adjustment lever
  4. Lumbar support adjustment switch (if equipped)

Toyota CH-R. Adjusting the seats

WARNING

■When adjusting the seat position

  • Take care when adjusting the seat position to ensure that other passengers are not injured by the moving seat.
  • Do not put your hands under the seat or near the moving parts to avoid injury.

    Fingers or hands may become jammed in the seat mechanism.

  • Make sure to leave enough space around the feet so they do not get stuck.

■Seat adjustment

  • Be careful that the seat does not hit passengers or luggage.
  • To reduce the risk of sliding under the lap belt during a collision, do not recline the seat more than necessary.

    If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces directly to the abdomen, or your neck may contact the shoulder belt, increasing the risk of death or serious injury in the event of an accident.

    Adjustments should not be made while driving as the seat may unexpectedly move and cause the driver to lose control of the vehicle.

  • After adjusting the seat, make sure that the seat is locked in position.
    Adjusting the seats
    ...

    Rear seats
    The seatbacks of the rear seats can be folded down. Before folding down the seatbacks Park the vehicle in a safe place.Apply the parking brake firmly and shift the shift lever to P. Adju ...

    Other materials:

    Toyota CH-R Service Manual > Airbag System: Check Mode Procedure
    CHECK MODE PROCEDURE CHECK MODE (SIGNAL CHECK): DTC CHECK (a) Turn the ignition switch off. (b) Connect the Techstream to the DLC3. (c) Turn the ignition switch ON. (d) Turn the Techstream on. (e) Enter the following menus: Body Electrical / SRS Airbag / Utility / Signal Check. Body Electri ...

    Toyota CH-R Service Manual > Vehicle Stability Control System: VSC does not Operate or VSC does not Operate Correctly
    DESCRIPTION When ABS, TRAC or VSC is operating, the skid control ECU (brake actuator assembly) blinks the slip indicator light to inform the driver that slippage occurred. When a communication malfunction with the ECM is detected, TRAC and VSC are disabled. Also, TRAC and VSC are disabled when ...

    Toyota C-HR (AX20) 2023-2025 Owner's Manual

    Toyota CH-R Owners Manual

    Toyota CH-R Service Manual

    © 2017-2025 Copyright www.tochr.net
    0.0116