PROCEDURE
1. |
CHECK AUDIO SETTINGS |
(a) Set bass, mid-range and treble to the initial values and check that the sound is normal.
OK:
The sound returns to normal.
HINT:
Sound quality adjustment measures vary according to the type of amplifier.
OK |
END (AUDIO SETTINGS ARE DEFECTIVE) |
|
2. |
COMPARE WITH ANOTHER VEHICLE OF SAME MODEL |
(a) Compare with another vehicle of the same model which is not malfunctioning to see if there is any difference in the sound quality.
OK:
No difference is found.
OK |
END |
NG |
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
Toyota CH-R Service Manual > Safety Connect System: Airbag Signal Malfunction/Not Input (B15C4)
DESCRIPTION
If the DCM (Telematics Transceiver) detects an error in communication between
the DCM (Telematics Transceiver) and the airbag sensor assembly as a result of the
DCM (Telematics Transceiver) self check, this DTC will be set.
DTC No.
Detection Item
DT ...
Toyota CH-R Service Manual > Vacuum Pump: Reassembly
REASSEMBLY
PROCEDURE
1. INSTALL VACUUM PUMP VANE
(a) Apply engine oil to the vacuum pump vane and 2 vacuum pump vane caps.
(b) Install the vacuum pump vane caps to the vacuum pump vane.
NOTICE:
When reusing the vacuum pump vane and vacuum pump vane caps, install
them in the ...