Toyota CH-R Service Manual > Rear Brake(for Tmmt Made): Inspection
INSPECTION
PROCEDURE
1. INSPECT PAD LINING THICKNESS
(a) Using a ruler, measure the rear disc brake pad lining thickness.
Standard Thickness:
9.5 mm (0.374 in.)
Minimum Thickness:
1.0 mm (0.0394 in.)
If a rear disc brake pad lining thickness is less than the minimum th ...
Toyota CH-R Service Manual > Front Door Outside Moulding: Removal
REMOVAL
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for the RH and LH sides.
The procedures listed below are for the LH side.
PROCEDURE
1. REMOVE FRONT DOOR OUTSIDE MOULDING
(a) Apply protective tape around the front door outside moulding.
Prot ...