DIAGNOSIS SYSTEM
DESCRIPTION
(a) Seat heater system data and Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the Techstream to check for malfunctions and perform troubleshooting.
CHECK DLC3
(a) Check the DLC3.
Click here
INSPECT BATTERY
(a) Check the battery voltage.
Standard voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery.
Toyota CH-R Service Manual > Immobiliser System(w/o Smart Key System): Terminals Of Ecu
TERMINALS OF ECU
CHECK TRANSPONDER KEY ECU ASSEMBLY
(a) Disconnect the F22 transponder key ECU assembly connector.
(b) Measure the resistance and voltage according to the value(s) in the table
below.
HINT:
Measure the values on the wire harness side with the connector disconnected.
...
Toyota CH-R Service Manual > Air Conditioning Unit(for Denso Made): Disassembly
DISASSEMBLY
PROCEDURE
1. PRECAUTION
NOTICE:
Make sure to perform initialization after replacing the air conditioning radiator
damper servo sub-assembly. If initialization is not performed, the air conditioner
unit assembly will not perform properly as the air conditioning amplifier assembly ...