Toyota CH-R Service Manual: Customize Parameters

Toyota CH-R Service Manual / Heating / Air Conditioning / Air Conditioning System(for Automatic Air Conditioning System With Side-mounted Air Conditioner Pressure Sensor) / Customize Parameters

CUSTOMIZE PARAMETERS

CUSTOMIZE AIR CONDITIONING SYSTEM

(a) Customizing with the Techstream.

NOTICE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

HINT:

The following items can be customized.

(1) Connect the Techstream.

(2) Turn the ignition switch to ON.

(3) Turn the Techstream on.

(4) Enter the following menus: Customize Setting / Air Conditioner.

(5) Select the setting by referring to the table below.

Air Conditioner

Tester Display	Description	Default	Setting	ECU
Set Temperature Shift	Function to perform control with the shifted temperature versus the displayed temperature	Normal	00001:-2C,00010:-1C,00100:Normal,01000:+1C,10000:+2C	Air conditioning amplifier assembly
Evaporator Control	Function to set the evaporator control to the Automatic position (AUTO) to save power or to the coldest position (MANUAL) to dehumidify the air and to prevent the windows fogging up.	Automatic	0:Automatic,1:Manual	Air conditioning amplifier assembly
Foot/DEF Auto Mode	Function to turn the airflow to foot/defroster automatically when AUTO mode is on	ON	0:ON,1:OFF	Air conditioning amplifier assembly
Foot/DEF Automatic Blow Up Function	Function to increase the blower level automatically when the defroster is on	ON	0:ON,1:OFF	Air conditioning amplifier assembly
ECO MODE Cancel	Function to cancel ECO mode when set to ON	ON	0:OFF,1:ON	Air conditioning amplifier assembly
Refrigerant Shortage Check	Function to cancel the refrigerant shortage check (check performed during normal operation) when set to ON	ON	0:ON,1:OFF	Air conditioning amplifier assembly
Fan speed increment control	Function to set the speed to reach the target blower fan speed when AUTO mode is on	Normal	001:Slow,010:Normal,100:Fast	Air conditioning amplifier assembly
Outside Air Mode Auto Switch Function	Function to automatically change the air inlet to FRESH mode when the ignition switch is off for 60 seconds	ON	0:ON,1:OFF	Air conditioning amplifier assembly

(b) Customizing with the multi-display.

(1) Turn the ignition switch ON.

(2) Enter the following menus: SETUP / Vehicle / Vehicle Customization / Climate Settings.

(3) Select the setting by referring to the table below.

Climate Setting

Display	Default	Content	Setting	Relevant ECU
Auto A/C Mode	On	Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off.	On or Off	Air Conditioning Amplifier

System Description

SYSTEM DESCRIPTION GENERAL The air conditioning system has the following controls. Control Outline Neural Network Control This control is capable o ...

Initialization

INITIALIZATION INITIALIZATION SERVO MOTOR (a) Turn the ignition switch off. (b) Connect the Techstream to the DLC3. (c) Turn the ignition switch to ON. (d) Press the A/C OFF switch. (e) Turn the ...

Other materials:

Toyota CH-R Service Manual > Lighting System: Vehicle Specifications have not been Stored (B2451)
DESCRIPTION This DTC is output if the vehicle variation information is not written to the headlight ECU sub-assembly LH. The headlight ECU sub-assembly LH outputs DTC B2451. DTC No. Detection Item DTC Detection Condition Trouble Area Note ...

Toyota CH-R Service Manual > Blind Spot Monitor System: Short to GND or Open in Buzzer (C1ABE)
DESCRIPTION DTC C1ABE is stored when the blind spot monitor sensor RH (Slave) detects a short to ground or open in the RCTA buzzer (blind spot monitor buzzer) circuit. DTC No. Detection Item DTC Detection Condition Trouble Area ...

Toyota CH-R Service Manual: Customize Parameters

System Description

Initialization

Other materials:

Toyota CH-R Owners Manual

Toyota CH-R Service Manual