DATA LIST / ACTIVE TEST
DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Data List.
(e) Read the Data List according to the display on the Techstream.
Body Electrical > Main Body > Data List
Tester Display |
Measurement Item |
Range |
Normal Condition |
Diagnostic Note |
---|---|---|---|---|
Key Unlock Warning SW |
Unlock warning switch |
ON or OFF |
ON: Ignition key inserted OFF: Ignition key not inserted |
- |
ACC SW |
Ignition switch ACC signal |
ON or OFF |
ON: Ignition switch ACC OFF: Ignition switch off |
- |
IG SW |
Ignition switch IG signal |
ON or OFF |
ON: Ignition switch ON OFF: Ignition switch off |
- |
RR Door Courtesy SW |
Rear door courtesy light switch RH signal |
ON or OFF |
ON: Rear door RH open OFF: Rear door RH closed |
- |
RL Door Courtesy SW |
Rear door courtesy light switch LH signal |
ON or OFF |
ON: Rear door LH open OFF: Rear door LH closed |
- |
Back Door Courtesy SW |
Back door courtesy switch signal |
ON or OFF |
ON: Back door open OFF: Back door closed |
- |
FR Door Lock Pos |
Front door RH unlock detection switch signal |
LOCK or UNLOCK |
LOCK: Front door RH locked UNLOCK: Front door RH unlocked |
- |
FR Door Courtesy SW |
Front door courtesy light switch RH signal |
ON or OFF |
ON: Front door RH open OFF: Front door RH closed |
- |
FL Door Lock Pos |
Front door LH unlock detection switch signal |
LOCK or UNLOCK |
LOCK: Front door LH locked UNLOCK: Front door LH unlocked |
- |
FL Door Courtesy SW |
Front door courtesy light switch LH signal |
ON or OFF |
ON: Front door LH open OFF: Front door LH closed |
- |
RR-Door Lock Pos SW |
Rear door RH and LH unlock detection switch signal |
ON or OFF |
ON: Rear door RH or LH unlocked OFF: Rear door RH and LH locked |
*1 |
RL-Door Lock Pos SW |
Rear door RH and LH unlock detection switch signal |
ON or OFF |
ON: Rear door RH or LH unlocked OFF: Rear door RH and LH locked |
*2 |
Wireless Control |
Wireless door lock control function |
ON or OFF |
Customization status displayed |
- |
Hazard Answer Back |
Hazard answer-back of wireless |
ON or OFF |
Customization status displayed |
- |
Wireless Auto Lock |
Automatic lock function |
ON or OFF |
Customization status displayed |
- |
Open Door Warning |
Open door warning |
ON or OFF |
Customization status displayed |
*3 |
Unlock 2 Operation |
2 times operation of wireless unlock |
ON or OFF |
Customization status displayed |
*3 |
Panic Function |
Panic function |
ON or OFF |
Customization status displayed |
*3 |
Auto Lock Time |
Automatic lock time |
120 s, 60 s or 30 s |
Customization status displayed |
- |
Wireless Buzzer Resp |
Buzzer answer-back of wireless |
ON or OFF |
Customization status displayed |
*3 |
P/W Wireless Ope Buzz |
Buzzer sounds of wireless power window |
ON or OFF |
Customization status displayed |
*3 |
Wireless Buzzer Vol |
Wireless door lock buzzer volume |
Level7, Level6, Level5, Level4, Level3, Level2, Level1 or Level0 |
Customization status displayed |
*3 |
Wireless Lock Function with Doors Open |
wireless reservation lock |
ON or OFF |
Customization status displayed |
*3 |
ACTIVE TEST
HINT:
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Active Test.
(e) Perform the Active Test according to the display on the Techstream.
Body Electrical > Main Body > Active Test
Tester Display |
Measurement Item |
Control Range |
Diagnostic Note |
---|---|---|---|
Door Lock |
Door lock motor |
OFF/Unlock/Lock |
- |
Wireless Buzzer |
Wireless door lock buzzer*1 |
OFF/ON |
- |
Toyota CH-R Service Manual > Vehicle Stability Control System: TRAC does not Operate
DESCRIPTION
When ABS, TRAC or VSC is operating, the skid control ECU (brake actuator assembly)
blinks the slip indicator light to inform the driver that slippage occurred.
When in VSC off mode, or TRAC and VSC are disabled, the multi-information display
in the combination meter assembly displa ...
Toyota CH-R Service Manual > Lighting (ext): Rear Side Marker Light Bulb
Components
COMPONENTS
ILLUSTRATION
*1
REAR COMBINATION LIGHT ASSEMBLY
*2
REAR COMBINATION LIGHT COVER
*3
REAR SIDE MARKER LIGHT BULB
*4
REAR COMBINATION LIGHT SOCKET AND WIRE
Removal
REM ...