DISASSEMBLY
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. REMOVE HEADLIGHT PROTECTOR
(a) Remove the headlight protector. |
|
2. REMOVE NO. 1 HEADLIGHT BULB
(a) Turn the No. 1 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.
NOTICE:
Do not touch the No. 1 headlight bulb glass.
Remove in this Direction |
3. REMOVE HEADLIGHT SOCKET COVER
(a) Remove the headlight socket cover from the headlight unit assembly. |
|
4. REMOVE FRONT TURN SIGNAL LIGHT BULB
(a) Turn the front turn signal light socket with the front turn signal light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.
Remove in this Direction |
(b) Turn the front turn signal light bulb to remove it from the front turn signal light socket as shown in the illustration.
Remove in this Direction |
5. REMOVE FRONT SIDE MARKER LIGHT BULB (for USA and Canada)
(a) Turn the front side marker light socket with the front side marker light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.
Remove in this Direction |
(b) Remove the front side marker light bulb from the front side marker light socket.
Remove in this Direction |
Toyota CH-R Service Manual > Air Conditioning System(for Automatic Air Conditioning System With Top-mounted
Air Conditioner Pressure Sensor): Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
HINT:
Use the table below to help determine the cause of problem symptoms.
If multiple suspected areas are listed, the potential causes of the symptoms
are listed in order of probability in the "Suspected Area" column of the
table. Check each sy ...
Toyota CH-R Service Manual > Vehicle Stability Control System: ABS Operates Before Necessary When Braking
DESCRIPTION
Troubleshooting for when ABS operates too soon due to a noisy signal from the
speed sensor, a difference in output, etc.
PROCEDURE
1.
PERFORM TEST MODE (SIGNAL CHECK) INSPECTION (SPEED SENSOR CIRCUIT)
(a) Using the Techstream, perform a Test Mode (Si ...