Toyota CH-R Service Manual: Lost Communication with ECM (U0100-U0142,U0155)

DESCRIPTION

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

Memory

U0100

Lost Communication with ECM

No communication with ECM

  • CAN communication system
  • ECM

Memorized

U0131

Lost Communication with Electric Power Steering ECU

No communication with power steering ECU assembly

  • CAN communication system
  • Power steering ECU assembly

Memorized

U0142

Lost Communication with Main Body ECU

No communication with main body ECU (multiplex network body ECU)

  • CAN communication system
  • Main body ECU (multiplex network body ECU)

Memorized

U0155

Lost Communication with Combination Meter

No communication with combination meter assembly

  • CAN communication system
  • Combination meter assembly

Memorized

PROCEDURE

1.

GO TO CAN COMMUNICATION SYSTEM

HINT:

Refer to CAN Communication System.

Click here

NEXT

END

    Open in Ion Generator Circuit (B14B9)
    DESCRIPTION The ion generator sub-assembly operates when both the ion generator switch and the blower switch are on. The air conditioning amplifier assembly sends a drive signal to the ion genera ...

    Lost Communication with Front Panel LIN (B14B2)
    DESCRIPTION The air conditioning control assembly communicates with the air conditioning amplifier assembly via LIN communication. If the LIN communication system malfunctions, the air conditionin ...

    Other materials:

    Toyota CH-R Service Manual > Vehicle Stability Control System: Zero Point Calibration of Acceleration Sensor Undone (C1336)
    DESCRIPTION The skid control ECU (brake actuator assembly) receives signals from the yaw rate and acceleration sensor (airbag sensor assembly) via CAN communication. The airbag sensor assembly has a built-in yaw rate and acceleration sensor and detects the vehicle's condition using 2 circu ...

    Toyota CH-R Service Manual > Occupant Classification System: Dtc Check / Clear
    DTC CHECK / CLEAR DTC CHECK (a) Turn the ignition switch off. (b) Connect the Techstream to the DLC3. (c) Turn the ignition switch to ON, and wait for at least 10 seconds. (d) Turn the Techstream on. (e) Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes. Body E ...

    Toyota CH-R Owners Manual

    Toyota CH-R Service Manual

    © 2017-2024 Copyright www.tochr.net
    0.0093